IACER Srl 18 MNPG53-07
*Autoscan program allows to adjust the desired therapy time
then it will start automatically a frequency cycle from 5 Hz to 120
Hz with a time therapy of 5 minutes for each frequency. It’s an
ideal program for the regeneration of both hard tissues (bones)
and soft tissues (tendons, ligaments) in the same treatment.
Program selection
Here are the instructions to follow for choosing the appropriate program
according to the pathology:
1. Within the menu, scroll through the list of programs by using the
keys and , then select the desired program and press OK.
N° Pathology Hz
Time (hours)
To Next Page
Loading...
