IACER I-TECH MAG2000 PLUS - Page 33

IACER Srl 33 MNPG53-07
Guidance and manufacturer's declaration – ELECTROMAGNETIC IMMUNITY –
FOR ALL DEVICES AND SYSTEMS
MAG2000 is intended for use in the electromagnetic environment specified
below. The user or operator of MAG2000 should assure that is used in such
environment.
Immunity test
Test level
IEC 60601
Compliance
level
Electromagnetic
environment –
guidance
for 5s
for 5s
Mains power
electromagnetic
field (50/60Hz)
IEC 61000-4-8
30A/m 30A/m
Mains power quality
should be at least that
one of a typical
commercial or hospital
environment.
Note: U
T
is the AC mains voltage before the application of the Test level.
Guidance and manufacturer's declaration – ELECTROMAGNETIC IMMUNITY
FOR DEVICES AND SYSTEMS THAT ARE NOT OF VIABLE FUNCTION
The MAG2000 Family is expected to operate in the electromagnetic environment
below specified. The user or operator of the MAG2000 family must ensure that it
is used in this environment.
Immunity test
Test level
IEC 60601
Compliance
level
Electromagnetic
environment – guidance
Portable and mobile RF communications equipment should not be used near any
part of the MAG2000
family, including cables, except where recommended
separation distances are observed, calculated from the equation applicable to
frequency of the transmitter.
Recommended separation distance
Conducted RF
IEC 61000-4-6
3V
eff
from 150 kHz
to 80 MHz
6V
eff
from 150 kHz
to 80 MHz for
ISM band
3V
eff
([V
1
] V)
6V
eff
([V
1
] V)
=






= P
V
d
1
5,
3
P
V
d






=
1
12
for ISM band
Irradiated RF
IEC 61000-4-3
10V/m
from 80 MHz
to 2,7 GHz
10V/m
[E
1
] V/m
P
E
d






=
1
12
from 80 MHz to 800 MHz