Need help?Do you have a question about the IBA ibaPADU-S-CM and is the answer not in the manual?
General| Product Type | Controller |
|---|---|
| Series | ibaPADU |
| Model | ibaPADU-S-CM |
| Operating Voltage | 24 V DC |
| Digital I/O Pins | 16 |
| Operating Temperature | -20°C to +60°C |
| Communication Interfaces | Ethernet, USB |
Specifies the allowed applications and intended use of the device as an electrical apparatus.
Highlights critical safety warnings, including voltage limits, handling under voltage, and warranty voiding.
Lists the necessary hardware components, including power supply, PC, FO input cards, and cables.
Specifies the required software versions, primarily ibaPDA, for device operation and configuration.
Defines the minimum firmware and hardware versions required for the ibaPADU-S-CM itself.
Detailed guide on how to mount the backplane and attach the ibaPADU-S-CM device securely.
Details the FO cable connections (X10 and X11) for data transfer using the 32Mbit Flex protocol.
Details the connection for the external 24 V DC voltage supply via the 2-pin connector X14.
Step-by-step guide on how to perform firmware updates using the ibaPDA software interface.
Initial steps for setting up the ibaPADU-S-CM connection and device detection within ibaPDA.
Lists core information like name, description, order number, power, and environmental operating conditions.
Details the inaNet FO protocol, data transmission rate, and FO cable specifications.
To Next Page