iBaby M2PRO User Manual

Quick Start Guide
Includes
iOS Installaon Guide
1 Baby Monitor
1 Camera Base
1 Quick Start Guide
1 Power Adapter
1 Wall Mount Kit
What you need to get started:
Geng Started
iOS
Android
Your Wi-Fi
Router/Modem
(not included)
Power Adapter
Monitor
Phone’s Original
USB Cable for
iOS Installaon
(not included)
Your Smart Device
(not included)
Step 1
Step 2
Step 4 Step 6
Step 5
Step 3
Verify that your smart device is connected to a
Wi-Fi network. Your router must provide Wi-Fi
connecon for Internet access.
On/Off
Reset Buon
On/Off
Reset Buon
From App Store, download the iBaby Care app
onto your supported device and launch the app.
Connect the power adapter to the back of your
monitor and turn it on.
Step 3
Connect the power adapter to the back of your
monitor and turn it on.
Step 4
Enter your passwrod when prompted then wait
for installaon.
Unplug the USB cable from your phone and
monitor when prompted, place the monitor on
the base & enjoy using your monitor!
Connect the original USB cable that comes with
your phone to the monitor and your phone.
Click Allow when you see any of the following
prompted messages.
1
3
2
4
5
1- Reset your monitor by holding the reset buon for 15 seconds
(located above the USB slot on the back of the monitor).
2- Follow steps 4 through 6.
Changing router or installaon failed?
1- Reset your monitor by holding the reset buon for 15 seconds
(located above the USB slot on the back of the monitor).
2- Launch the app and restart the installaon.
Changing router or installaon failed?
Guide de démarrage rapide
Guida rapida di avvio
Android Installaon Guide
Step 1
Step 2
Verify that your smart device is connected to a
Wi-Fi network. Your router must provide Wi-Fi
connecon for Internet access.
From Google Play, download the iBaby Care
*
app
onto your supported device and launch the app.
®
* Note: for availability on Android tables, visit www.ibabylabs.com
www.ibabylabs.com
780 Montague Expy, Ste 601
San Jose, CA 95131
support@ibabylabs.com
+1 (650) 396-2436
®
Wi-FiBack
Carrier 75%8:08 AM
Wi-Fi
Wi-FiBack
Carrier 75%8:08 AM
Wi-Fi
iBaby Care would like to
communicate with the
iBaby Labs, Inc iBaby M6
Share Wi-Fi Sengs?
Do you want to share your Wi-Fi
sengs so this accessory can
connect to the Wi-Fi network?
AllowIgnore
AllowIgnore
iBaby Care

iBaby M2PRO Specifications

General

Night Vision	Yes
Two-Way Audio	Yes
Wi-Fi Connectivity	Yes
Temperature Sensor	Yes
Sound Detection	Yes
Music Player	Yes
Dimensions	4.5 x 4.5 x 5.5 inches
Remote Pan/Tilt	Yes
Smartphone Compatibility	iOS and Android
Pan/Tilt	Yes
Humidity Sensor	Yes
Sound Alert	Yes
Motion Detection	Yes
Power Source	AC adapter
Camera Resolution	720p
Field of View	110 degrees
Mobile App	iBaby Monitor
Compatibility	iOS and Android

Summary

iOS Installation Guide

Step 1: Wi-Fi Connection

Verify your smart device is connected to a Wi-Fi network for internet access.

Step 2: Download iBaby Care App

Download the iBaby Care app from the App Store onto your device.

Step 3: Connect Power and Turn On

Connect the power adapter to the monitor and turn it on.

Step 4: USB Connection

Connect the original USB cable from your phone to the monitor.

Android Installation Guide

Step 1: Wi-Fi Connection

Verify your smart device is connected to a Wi-Fi network for internet access.

Step 2: Download iBaby Care App

Download the iBaby Care app from Google Play onto your device.

Step 3: Connect Power and Turn On

Connect the power adapter to the monitor and turn it on.

Step 4: Enter Password

Enter your password when prompted for installation.