Need help?Do you have a question about the Ibanez Artcore Series AF75 and is the answer not in the manual?
General| Body Type | Hollow Body |
|---|---|
| Neck Material | Mahogany |
| Fingerboard Material | Rosewood |
| Bridge | ART-1 |
| Tailpiece | VT06 |
| Controls | 2 Volume, 2 Tone, 3-Way Pickup Selector |
| Number of Frets | 20 |
| Finish | Gloss |
| Hardware Color | Chrome |
| Scale Length | 24.7 inches |
| Pickups | Dual Humbuckers |
| Fingerboard Radius | 12 inches |
| Nut Width | 1.69 inches |
| Tuners | Die-cast |
Guidance on replacing strings, adjusting truss rod tension, and information on tuning machines.
Adjusting saddle position to compensate for string gauge or tuning, ensuring notes are in tune across the fretboard.
Instructions for adjusting height and intonation on the Gibraltar Custom Bridge.
Details on string replacement, intonation, and string height adjustment for Hardtail bridges.
Methods for attaching strings and adjusting string height and intonation for Gibraltar Standard bridges.
Instructions for adjusting string height and intonation on Adjustable Arch Top bridges.
Guidance on replacing strings on VBX60 or VBS80 models, and maintaining vibrato spring tension.
Adjusting height on QUIK CHANGE III and fine tuning functionality of QUIK CHANGE ULTRA.
Instructions for installing strings and using the Downshifter for special tunings and pitch changes.
Details on string height adjustment, stud lock function, and intonation adjustment for Tight-Tune bridges.
How to use the stud lock function to secure the bridge after height adjustment.
Procedure for adjusting the intonation on the Tight-Tune bridge.
Information on the FX-Edge Bridge, a fixed, double locking bridge system.
How to adjust string height on the FX-Edge Bridge using the studs.
Instructions for tremolo arm installation, arm rotation torque, and adjusting the tremolo springs.
Adjusting the Zero Point system for tuning stability and string break compensation.
How to disable the Zero Point system to allow the tremolo to float freely.
Adjusting ACT tremolo springs to achieve optimal parallel position with the guitar body.
To Next Page
