EasyManua.ls Logo

IBC BTI 30 - User Manual

IBC BTI 30
24 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
BT INDIRECT SERIES WATER HEATERS
BTI 30, BTI 40, BTI 55, BTI 65, BTI 80, BTI 80-MAX, BTI 119-MAX
FOR SINGLE WATER HEATER INSTALLATIONS
For service or repairs to the water heater, call your heating contractor. Your water heater has been
manufactured to provide years of service. In order to insure proper service, the following information is
provided to assist in enabling the installation, operation, and maintenance of this water heater. When the
installation is completed, keep this manual with the water heater.
Product complies with NSF/ANSI 372 and conforms with lead content requirement for “lead-free” plumbing
as dened by the California, Vermont, Maryland and Louisiana state laws and the U.S. Safe Drinking Water
Act in effect as of January 4, 2014.
INSTALLATION AND OPERATING INSTRUCTIONS
www.ibcboiler.com
CAUTION
1. Theheattransfer-mediummustbewaterorothernontoxicuid
having a toxicity rating or Class of 1, as listed in Clinical Toxicology
of Commercial Products, 5th edition.
2. The pressure of the heat transfer medium must be limited to a
maximum of 30 PSIG by an approved safety or relief valve.

Table of Contents

Questions and Answers

  • S
    sean30Aug 9, 2025
    Why is the water at faucets too hot with my IBC Water Heater?
    • R
      Robert SandersAug 9, 2025
      If the water from your IBC Water Heater is too hot, it might be due to several reasons: * The DHW temperature setting could be too high; try reducing the DHW Tank Set Point temperature. * The DHW temperature sensor might be giving a false reading because it is not fully inserted into the well, giving an incorrect resistance reading, connected to IBC Therm terminals instead of DHW Sensor terminals, or an improper 3rd party sensor is installed in well.
  • J
    Jasmine WilliamsAug 25, 2025
    What to do if the water at faucets is too cool from my IBC Water Heater?
    • A
      Alexa SmithAug 25, 2025
      If the water from your IBC Water Heater is too cool, it could be because: * The DHW temperature setting is too low. Increase the DHW Tank Set Point temperature. * The Boiler Maximum Supply Temp. setting is too low. Ensure the Maximum Supply Temp. setting is at least 10°F higher than the DHW Supply Setpoint PLUS 1/2 of the Supply Diff’l Temp setting.

IBC BTI 30 Specifications

General IconGeneral
BrandIBC
ModelBTI 30
CategoryWater Heater
LanguageEnglish

Related product manuals