IBC SFC-199 User Manual

INSTALLATION AND OPERATING INSTRUCTIONS
www.ibcboiler.com
SFC 199
COMBI BOILERS
(Natural Gas or Propane)
WARNING: If the information in this manual is not followed exactly, a re or
explosion may result causing property damage, personal injury, or loss of life.
Do not store or use gasoline or other ammable vapours and liquids or other
combustible materials in the vicinity of this or any other appliance.
WHAT TO DO IF YOU SMELL GAS:
• Do not try to light any appliance.
• Do not touch any electrical switch; do not use any phone in your building.
• Immediately call your gas supplier from a nearby phone. Follow the gas
supplier’s instructions.
• If you cannot reach your gas supplier, call the re department.
Installation and service must be performed by a qualied installer, service
agency or the gas supplier.
Le manuel est également disponible en français. Visitez le portail << Technical Information Portal >> à notre
site web www.ibcboiler.com.

IBC SFC-199 Specifications

General

Brand	IBC
Model	SFC-199
Category	Industrial Equipment
Language	English

Summary

Safety Considerations

Hazards and Precautions

Specifications

Water Heater Installation Guidelines

Adjustable Temperature Setting

Installation Guide

General Installation Information

Overview of the SFC series units and their intended use.

Code Requirements

Conformity to national and local codes for installation.

Location Considerations

Guidelines for selecting a suitable location for the unit.

Exhaust Venting and Air Intake

Requirements for exhaust venting and combustion air intake systems.

Condensate Removal

Procedures for safe and effective condensate drainage.

Space Heating Water Piping

Guidance on piping for space heating systems.

Domestic Hot Water System

Information on setting up and operating the domestic hot water system.

Gas Piping Installation

Instructions for connecting the gas supply to the unit.

Electrical Connections

Guidelines for properly wiring the unit.

Unit System Operation Overview

General Unit Operation

Overview of the SFC series units' heating and hot water functions.

Control Interface

Explanation of controller indicators and touch pad functions.

Installer Interface

Guide to accessing menus and adjusting settings like temperature.

Tankless Domestic Hot Water Modes

Description of Standard, Comfort, and ECO Comfort modes for DHW.

Adding Domestic Hot Water Storage

Options for connecting storage tanks or indirect heaters for DHW.

Space Heating Overview

How the unit provides space heating using outdoor reset or setpoint.

Sequence of Operation

Step-by-step process of how the unit operates during a heating call.

Startup and Commissioning Procedures

Lighting and Shutting Down the Unit

Safety instructions and steps for operating the unit ON/OFF.

Prior to Start-Up

Essential pre-ignition checks and safety shutoff tests.

Commissioning

Factory calibration and field adjustments for natural gas or propane.

Fuel Conversion

Procedure for converting the unit between natural gas and propane.

Maintenance Procedures

Unit Maintenance - General Care

Covers general care, inspection, venting, condensate trap, and burner maintenance.

Unit Maintenance - System Components

Details maintenance for heat exchanger, pump, gas piping, control module, water system, and freeze protection.

Unit Maintenance - Treatment and DHW

Covers system treatment, relief valve testing, and domestic hot water system checks.

Troubleshooting Guide

Preliminary Checks

Initial steps to identify and solve problems by checking basic functions.

Electronic Components

Troubleshooting methods for sensors and other electronic components.

Warnings and Faults

Explains warning codes (F000-F030) and their causes/solutions.

Other Faults

Addresses common issues like no heat, incorrect temperatures, or burner problems.

Technical Diagrams

Parts Diagrams

Exploded views and lists of unit assembly parts.

Wiring Diagrams

Schematic and ladder diagrams for electrical connections.