IBC SFT Series User Manual

USER’S INFORMATION MANUAL
8
SFT SERIES WATER HEATERS
Programming Mode
There are two parameters available in the User Setup Menu.
Adjusting the domestic hot water Temperature
To adjust the DHW:
1. Touch the area above the dot.
2. Touch the Faucet button.
The tankless domestic hot water temperature target appears on the main display.
3. To change the DHW temperature target, touch the Plus or Minus buttons.
4. To:
• Save the changes, touch the Return button.
• Exit without saving the changes, touch the area above the dot.
NOTE
The domestic hot water
thermostat is adjusted to its
lowest temperature position
when shipped from the
factory. It’s recommended to
set the domestic hot water
thermostat to 120°F/49°C as
an initial setting and further
adjust as required. For
energy efcient operation,
this setting should be set
as low as practical for the
consumer’s needs.

IBC SFT Series Specifications

General

Brand	IBC
Model	SFT Series
Category	Water Heater
Language	English