Installation
Controls - How to Operate Your Refrigerator
Owner’s Manual
Congratulations on your new iBeeCool purchase! Please read the enclosed information to help
you become familiar with your new machine.
Please ensure the machine has been transported in an upright position. If not, please let the unit
stand one hour before energizing it.
Refrigeration equipment must be properly installed. It must be indoors on a level oor, have
adequate air circulation, and be in a cool, dry environment. It cannot be in heat conditions that
exceed 26° Celsius (80° F). Operating efcienty may decrease in high humidity. Locations must
be away from heat and moisture generating equipment because ambient temperatures may
cause the unit to malfunction and void the warranty.
The electrical components require proper grounding and a dedicated circuit. Any tampering will
void the warranty.
1. Plug in your machine.
2. Press the “SET” button for 2 seconds until the
CURRENT SETPOINT VALUE ashes on the
display.
3. Press the “UP” or “DOWN” buttons
accordingly to change the SETPOINT VALUE.
4. Once you are satised with the temperature,
press the “SET” button to modify and save the
current temperature.
Please note: Set points are 2° to 4° Celsius (35°
to 38° Fahrenheit) for a refrigerator.
Refrigeration Controls
When changing your temperature setting, be mindful when selecting your temperature set
point. Choosing a temperature that is too low will cause the coil to freeze and make the cabinet
warmer, which may damage your unit. To maintain correct airow inside your cabinet, your
shelving requires 2 to 3-inches of space between the back wall. Do not overll your refrigerator,
or your cabinet may become too warm.
Page 3
To Next Page
Loading...