10
Unpack all parts and lay them on flat, stable surface. Remove all
packing materials. Make sure the delivery contents are complete
and free of any damage. If you find that parts are missing or
show damage, do not use the product but contact your dealer.
Using an incomplete or damaged product represents a hazard to
people and property.
Ensure that you have all the accessories and tools needed for
assembly and operation. This also includes suitable personal
protective equipment.
This product is intended for fastening and removing screws
majorly. It can also be used for drilling in wood, steel (light
purpose only).
SD10-86 and SD12-75 has 19 and 23 torque settings respectively
and one drill setting each.
It should not be used for working on materials that are dangerous
to health. The product is not suitable for heavy duty works.
For safety reasons it is essential to read the entire instruction
manual before first operation and to observe all the instructions
mentioned in it.
WARNING! The product must be fully assembled before
operation! Do not use a product that is only partly assembled or
assembled with damaged parts! Follow the assembly instructions
and use the pictures provided as a visual guide to easily assemble
the product! Do not connect the product to power supply before it
is completely assembled!
To Next Page
Loading...
Need help?
General