23
Reversing the door of your appliance
Caution! After unscrewing any of the fixing
hinges, hold the door to prevent it from falling
and causing damage.
Any parts that you remove from the appliance whilst
reversing the door, should be retained for later use.
o Unscrew the screws on the front surface of the appliance door.
Take the appliance door off and place it on a soft surface where
it will not be scratched.
o Move the hole plugs on the appliance door’s front surface to the
holes on the reverse side.
o Open the door upper hinge and door lower hinge and
disassemble them.
To Next Page