● Plug in the 90 degree power terminal to the 12V port on the battery (Fig. 3). This will
energize the entire system.
Fig 3.
● The battery has a built-in surge protector and an auto shut down feature if there is
ever a short circuit in the system. Simply turn the power switch off and back on to
reset the auto shutdown protection feature. If this feature keeps tripping, there is a
short in the circuit and that must be addressed before resetting this function again.
Check that all wires are clean and not arcing or touching each other.
2022-01.0 IBEX EQUIPMENT CO
To Next Page
Loading...
