Need help?Do you have a question about the ibico ML-4 and is the answer not in the manual?
Manual for operating and registering the ML-4 and ML-9 laminators.
Details the electrical input requirements for the laminator.
Provides the physical size specifications for the ML-4 and ML-9 models.
Indicates the time needed for the laminator to reach optimal operating temperature.
Specifies the largest pouch size the laminator can accommodate.
Crucial safety instructions to prevent hazards during operation and maintenance.
Instructions for checking the laminator for shipping damage upon receipt.
Guidance on positioning the laminator and connecting it to a suitable power source.
Advice on materials, trimming, and processing for optimal lamination results.
Steps to turn on the laminator and preheat it using the power and ready lights.
Steps for placing the item into the pouch and centering it for an even border.
Guidance on inserting the prepared pouch, sealed edge first, into the carrier.
Instructions for feeding the carrier into the laminator, ensuring it's not skewed.
Describes the automatic output of the laminated item and notes on its temperature and clarity.
To Next Page
General
