These instructions are divided into four parts and an Index:
• PART ONE provides FAST START instructions for all users—
quick setup and Newton calibration
• PART TWO describes basic features of interest to all Newton
users
• PART THREE describes advanced features
• PART FOUR includes Troubleshooting, FAQ and Appendices
• INDEX has a complete list of topics: page 54-55
THESE INSTRUCTIONS REQUIRE THE USE OF FIRMWARE 5.0 OR
HIGHER. THEY DO NOT APPLY TO NEWTONS WITH OLDER
VERSIONS OF FIRMWARE (VERSIONS 1.X – 4.X)
To learn how to install your Newton mount and sensors, please refer
to printed instructions included separately inside your Newton’s
box.
Other resources:
Enjoy the large forum community of Newton owners
www.ibikeforum.com
OR, please email us at
technicalsupport@velocomp.com
Also, check out our FaceBook page:
https://www.facebook.com/iBikePowerMeters
Make sure to visit our website frequently to get the latest in Newton
product, software, and information updates:
www.ibikesports.com
To Next Page