ibis Cycles Ripmo AF 2021 User Manual

WHAT IS TRACTION TUNED?
We want to promote very responsive suspension performance, so we have developed Traction Tune for the Ripmo.
We recommend having high-speed adjustments wide open or close to it, and using just enough low-speed
damping to provide stability to the bike.
For maximum traction and performance, your front and rear suspension need to be balanced. To achieve
proper balance, you need to setup your suspension so it matches your style and the steepness of your terrain.
Here is the recommended procedure to get the most out of your suspension.
First, set your fork sag with your riding gear on. Determine the sag by picking a riding style listed
below. While in a standing position on the bike (see illustration), set the sag to the correct number
of mm. Use the starting guidelines from the chart below left, these will generally get you close
to 28% sag. You will likely need to raise or lower pressures to get the recommended setting.
28% / 45mm Sag:
Best for normal trail riding where efficient pedalling and a stable platform is required.
30% / 48mm Sag:
For aggressive riding in terrain that demands your attention.
32% / 51mm Sag:
Use for rough, steep, slippery trails when maximum control is a must.
QUICK SETUP GUIDE
STEP 1 FORK TUNING
- Continued -
ONYX AIR PRESSURES : 29
RIDER WEIGHT (LB) 28% SAG 30% SAG 32% SAG
120 30 25 20
130 35 30 25
140 40 35 30
150 45 40 35
160 50 45 40
170 55 50 45
180 60 55 50
190 65 60 55
200 70 65 60
210 75 70 65
220 80 75 70
230 85 80 75
240 90 85 80
250 95 90 85
TURNS FROM CLOSED POSITION CLICKS FROM CLOSED
HSC LSC LSR
5 1-2 30
5 1-2 30
5 1-2 30
5 1-2 28-30
5 2-4 28-30
4-5 2-4 28-30
4-5 2-4 25-30
4-5 2-4 25-30
4-5 2-4 25-30
4-5 2-4 22-30
3-5 2-4 22-30
3-5 3-5 22-30
3-5 3-5 20-30
3-5 3-5 20-30
5 TOTAL TURNS 6-POSITION KNOB 30 CLICKS
SAG RANGE
SAG is the amount your
fork compresses under
your body weight (don’t
forget to include your
riding gear), also referred
to as Rider Weight.
Remember that these are
only starting points and
adjustments will vary
based on rider ability,
trail conditions and
personal preference.
IN MID 2020, WE STARTED SHIPPING DVO ONYX FORKS AS STANDARD EQUIPMENT ON THE RIPMO AND RIPMO AF.
ONYX COMPRESSION & REBOUND SETTINGS

ibis Cycles Ripmo AF 2021 Specifications

General

Frame Material	Aluminum
Travel (Front)	160 mm
Travel (Rear)	147 mm
Suspension Type	Full Suspension
Dropper Post	Yes
Chainstay Length	435 mm
Wheel Size	29 inches
Bottom Bracket Height	343mm
Fork	Fox Float 36
Rear Shock	Fox Float DPX2 Performance
Dropper Post Travel	150 mm
Tires	Maxxis Assegai (Front), Maxxis DHR II (Rear)

Summary

What is Traction Tuned?

Step 1 Fork Tuning

Fork Sag Settings

Guidelines for setting fork sag (28%, 30%, 32%) based on riding style and terrain.

DVO Onyx Air Pressure

Recommended air pressures for DVO Onyx forks based on rider weight.

Onyx Compression & Rebound Settings

Starting compression and rebound settings for DVO Onyx forks.

DVO OTT Setting

OTT Explained

Explanation of DVO's Off The Top feature for adjusting negative spring tension.

OTT Adjustment Guide

Chart for OTT rotation settings based on rider weight for desired firmness.

Step 2 Fork Rebound Settings

Balancing Your Suspension

Adjusting fork and rear shock pressures based on descent grade for optimal balance.

Step 3 Shock Tuning

DVO Topaz Air Shock Pressure

Recommended air pressures for DVO Topaz air shocks by rider weight.

Jade X Coil Shock Tuning

Guide for selecting Jade X Coil shock spring weights and bladder setup air pressure.

Torque Specs

Hardware Torque Specifications

Recommended torque values for various hardware components on Ripmo V2 and Ripmo AF.