ibis OSO - Procedure; Step 1: Remove Battery; Step 2: Tighten Cradle Bolts; Step 3: Install Battery and Mount

7 pages

To Next Page

To Previous Page

OSO | BATTERY MOUNT INSTALLATION GUIDE

PROCEDURE

STEP 1

• Remove the battery door and the battery.

STEP 2

• Use a T20 key to ensure the bolts holding the lower battery cradle to the lower battery mount

are tight. Torque: 2Nm

STEP 3

• Install the battery.

• Tighten the front battery mount snug then back it out 3/4 turn.

Torque: 2Nm