Do you have a question about the Ibiza sound SLK8A-BT and is the answer not in the manual?
Brand | Ibiza Sound |
---|---|
Model | SLK8A-BT |
Category | Speakers |
Bluetooth | Yes |
Speaker Size | 8 inch |
Microphone Input | Yes |
Line Input | Yes |
Type | Bluetooth Speaker |
Frequency Response | 20 Hz - 20 kHz |
Inputs | USB, SD Card, AUX |
Charging Time | 4 hours |
Woofer | 8 inch |
Electric products must not be put into household waste. Please bring them to a recycling centre.
Prior to using your sound system, please read the safety instruction in order to protect your box.
Read and keep the manual for future reference.
The MAINS plug or appliance coupler shall remain operable. Replace fuses with identical specifications.
Ensure adequate ventilation, avoid covering slots, keep away from heat sources, use in moderate climates.
Boxes can be fixed via accessories. Avoid exposure to SPLs higher than 85dB to prevent hearing damage.
Boxes are not weatherproof and prolonged exposure to humidity or extreme temperatures can shorten lifetime.
Details compression driver, horn, Sonic Guard, multiangular cabinet, durable construction, and ergonomic design.
Describes Speakon connector wiring and parallel connection for master/slave units.
Protects the tweeter against damages due to exceptional power peaks by compressing the signal.
Instructions for powering on, connecting mains, setting voltage, and using controls or remote.
Explains usage of MUTE, input selection, playback control, volume adjustment, track navigation, and EQ.
Steps to activate Bluetooth, connect a device, and play music, with volume and distortion warnings.
Guides on diagnosing problems like 'No output' and amplifier signal issues by checking connections and cables.
Troubleshooting for intermittent speaker function and ongoing noise from wiring or electronic components.
Addresses issues with bad low-frequency reproduction, often caused by reversed polarity between connected boxes.
Lists frequency range, sensitivity, dispersion angle, max power, and nominal impedance for the speaker box.
Details specifications for the built-in amplifier including frequency range, RMS power, THD, S/N ratio, and sensitivity.