Do you have a question about the Ibiza LMH350LED and is the answer not in the manual?
Control Protocol | DMX 512 |
---|---|
Type | Moving Head |
Pan | 540° |
Tilt | 270° |
Light Source | LED |
Power Supply | AC100-240V 50/60Hz |
Voltage | 100-240V |
Instructions for unpacking and checking the fixture upon delivery.
Crucial guidelines for safe installation, usage, and maintenance of the product.
Details about the machine's features, voltage, fuse, and power consumption.
Details the DMX channel assignments for 8-channel mode.
Details the DMX channel assignments for 13-channel mode.
Step-by-step guide on how to replace the fuse using a screwdriver.
Instructions on connecting multiple fixtures for synchronized shows using DMX or Master/Slave.
Information on using data cables and DMX connector configuration.
Chart detailing the conversion for 3-pin to 5-pin DMX connectors.
Steps for connecting DMX cables from a controller to fixtures.
Explains how to use the four buttons to navigate the control panel menu.
Overview of the unit's six operating modes and how to select them.
How to set maximum pan and tilt movement ranges.
Options for reversing pan/tilt and LED display orientation.
How to select between 'Fast' and 'Slow' auto run modes.
How to activate the sound-controlled mode for light shows.
How to set the unit to operate as a slave in a Master/Slave setup.
Procedures for rebooting, resetting the unit, and restoring factory defaults.
Setting DMX addresses and choosing between 8 or 13 channel modes.
Lists DMX channel functions and value ranges for 8-channel mode.
Lists DMX channel functions and value ranges for 13-channel mode.