Before You Begin
Before You Begin
If you have a disk-array model, you must configure your disk
arrays after you install hard disk drives, as described in
“Installing Internal Drives” on page 197. In this case, follow the
instructions in Chapter 3, “Configuring the Disk Array” on
page 77. after installing the drives. Return here to install your
remaining options, if applicable. See Chapter 6, “Configuring
Your Server” on page 279 for additional details about
configuration, and a description of your server utility programs.
Become familiar with the safety and handling guidelines
specified under “Safety Information” on page ix, “Electrical
Safety” on page 161, and “Handling Static-Sensitive Devices” on
page 162. These guidelines will help you work safely while
working with your server or options.
Chapter 5. Installing Options 159
To Next Page
Loading...
