Need help?Do you have a question about the IBM System x3650 M4 BD Type 5466 and is the answer not in the manual?
General| Form Factor | 2U Rack |
|---|---|
| Operating System Support | Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware vSphere |
| Memory | Up to 768GB DDR3 |
| Storage | Up to 16x 2.5" hot-swap SAS/SATA HDDs/SSDs |
| Power Supply | 750W |
| Network Interface | Integrated quad-port Gigabit Ethernet |
| RAID Support | RAID 0, 1, 10 |
| Remote Management | IBM IMM2 |
| Processor | Intel Xeon E5-2600 v2 series |
Provides a summary of the server's features, including microprocessor, memory, drive bays, and expansion slots.
Details the server's features and technologies, such as Features on Demand, Integrated Management Module II, and UEFI firmware.
Explains the RAS features that ensure data integrity, availability, and ease of diagnosis.
Describes the server's controls, light-emitting diodes (LEDs), and power management.
Provides essential safety precautions and general guidelines for installing optional devices.
Guidelines for performing tasks inside the server while it is powered on.
Instructions on how to handle static-sensitive devices to prevent damage.
Step-by-step instructions for safely removing the server's top cover.
Details on installing and configuring memory modules (DIMMs) for optimal performance.
Instructions for installing a second microprocessor and its associated heat sink.
Final steps to complete the server installation after hardware setup.
Procedures for acquiring and applying firmware and device driver updates for the server.
Explains the use of configuration programs like Setup utility and Boot Manager.
Steps to diagnose problems, including using system data and checking LEDs.
Tables listing common symptoms and suggested actions for problem resolution.
Overview of tools like Light path diagnostics, Event logs, and IBM Dynamic System Analysis.
Lists components that can be replaced, including CRUs and FRUs.
Identifies parts that are not covered by the IBM Limited Warranty and are for retail purchase.
Instructions for replacing customer-replaceable units (CRUs) that are considered Tier 1.
Step-by-step instructions for safely removing the server's top cover.
Instructions for removing the air baffle to access server components.
Preliminary steps to take before contacting IBM Support for assistance.
Guidance on accessing and utilizing the available product documentation.
To Next Page