Removing and replacing components
Use this information to remove and replace the server components.
Replaceable components consist of consumable parts, structural parts, and field
replaceable units (FRUs):
v Consumables: Purchase and replacement of consumables (components, such as
batteries and printer cartridges, that have depleting life) is your responsibility. If
IBM acquires or installs a consumable component at your request, you will be
charged for the service.
v Structural parts: Purchase and replacement of structural parts (components, such
as chassis assembly, top cover, and bezel) is your responsibility. If IBM acquires
or installs a structural component at your request, you will be charged for the
service.
v Field replaceable unit (FRU): FRUs must be installed only by trained
technicians, unless they are classified as customer replaceable units (CRUs):
– Tier 1 customer replaceable unit (CRU): Replacement of Tier 1 CRUs is your
responsibility. If IBM installs a Tier 1 CRU at your request, you will be
charged for the installation.
– Tier 2 customer replaceable unit: You may install a Tier 2 CRU yourself or
request IBM to install it, at no additional charge, under the type of warranty
service that is designated for your server.
See Chapter 5, “Parts listing,” on page 153 to determine whether a component is a
consumable, structural part, Tier 1 CRU, Tier 2 CRU or FRU.
Chapter 6. Removing and replacing components 165
To Next Page
Loading...
Need help?
General
