Connecting External Options
Installation Procedure
To attach an external device:
1. Turn off the server and all attached devices.
Note: To turn off the server, press the Power On/Off switch.
The Power On/Off switch is located under a transparent
cover on the right side of the front of the server.
Therefore, before you can turn off the server, you must
lift this transparent cover to reach the Power On/Off
switch.
To avoid accidentally pressing the Power On/Off switch
after you have turned the server off, return the
transparent cover to its original position.
2. Follow the instructions that come with the option to prepare it
for installation and to connect it to the server.
Chapter 5. Installing Options 275
To Next Page