Troubleshooting Charts
Monitor Problems
Action
Blank screen Verify that:
1. The voltage-selection switch is set to the correct
setting.
2. The system power cord is plugged into the system
and a working electrical outlet.
3. The monitor is turned on and the Brightness and
Contrast controls are adjusted correctly.
4. The monitor signal cable is connected to the correct
connector on the system.
If the items above are correct and the screen remains
blank, have the system serviced.
Only the cursor appears. Have the system serviced.
Wrong characters appear
on the screen.
Have the system serviced.
EISA Adapter Problems
Action
BCLK default setting
causing system to hang
when using EISA
Adaptec SCSI adapter.
Change the default setting from 28 to 12.
General Problems
Action
Problems such as broken
cover locks or indicator
lights not working.
Have the system serviced.
System continuously
restarts.
Have the system serviced.
352 PC Server 520 User's Handbook for PCI/EISA
To Next Page