Troubleshooting Charts
Memory Problems
Action
The amount of memory
displayed is less than the
amount of memory
installed.
Verify that:
1. The memory modules are seated properly.
2. Memory modules must be installed in pairs. See
“Installing Memory-Module Kits” on page 169 for
more information.
3. You updated the configuration information.
Whenever you change the memory or an option,
you must update the configuration by running the
EISA Configuration program (see “Starting the
EISA Configuration Diskette” on page 297).
If the above items are correct, have the system
serviced.
Run the memory test program from your
Diagnostic Diskette (see “Starting the Test
Programs” on page 318). The system might have
detected a bad memory module and automatically
reallocated memory to enable you to continue to
operate. If the memory tests fail, have the system
serviced.
Experiencing client
dropoff due to heavy
traffic on the server.
Increase memory. For example, you might install
16 MB of EOS memory in bank 1.
354 PC Server 520 User's Handbook for PCI/EISA
To Next Page