Installed Device Records
Table 8 shows the default cable connections from the ServeRAID
adapter Channels to each bank in the server.
Table 8. Channel-to-Bank Mapping on a ServeRAID Adapter
Channel Default
Cabling
New
Cabling
Default
J12
Setting
1
New J12
Setting
Channel 1 Bank E
2
Low
Channel 2 Bank D
2
Low
Channel 3 Bank C Low
Notes:
1. Backplane jumper J12 defines the SCSI IDs for drives installed in the bank as
Low (0 to 5) or High (8 to 13).
2. When this backplane is installed.
386 PC Server 520 User's Handbook for PCI/EISA
To Next Page