About ServerGuide
You must provide your OS/2 license information. The HelpWare
group will ship you a CD and installation diskettes.
OS/2 LAN Server 4.0 Fixpaks
There are several Fixpaks available for OS/2 LAN Server 4.0. These
Fixpaks are updated periodically to provide optimum support of
OS/2 LAN Server 4.0 functions across a wide range of hardware
configurations. To receive these updates in the U.S., call the IBM
OS/2 Technical Support Center at 1-800-992-4777. In all other
countries, contact the IBM support organization that services your
area, your IBM marketing representative, or your IBM reseller.
SCO OpenServer Installation
If you are installing Santa Cruz Operation (SCO) OpenServer 5.0 in
a disk-array model, you must have 3 GB for an HPFS partition. You
must obtain an additional device driver, ips. The Boot-Time
Loadable Driver is required for the ServeRAID Administration and
Monitoring program in your PC Server 520.
If you are installing an SCO operating system, you might need
updated device drivers for full compatibility with the latest
hardware used in IBM servers. Refer to the Start Here section on
the ServerGuide Main CD for information on how to obtain the
latest device drivers that are available from SCO. To install an SCO
operating system, follow the installation instructions that come with
the SCO operating system.
Windows NT Installation
For installation instructions for Windows NT, refer to the README
files on the diskette that comes with your operating system and on
the ServeRAID diskette that comes with your server.
If you have a disk-array model, and more than one logical drive is
present in a single drive configuration, and you intend to install
Windows NT, install DOS on the first logical drive. Then, install
Windows NT.
26 PC Server 520 User's Handbook for PCI/EISA
To Next Page
Loading...
