Installation Checklist
Ø Install options
If you decided earlier to delay installing your options, you
might want to complete these installations now. See
Chapter 5, “Installing Options” on page 153 for step-by-step
installation instructions.
Ø Complete setting up your PC Server 520
If you need to set passwords or drive-startup sequences, or do
other system setup tasks, use the procedures in “Using the
Setup Program” on page 275.
Ø Install SVGA and SCSI device drivers
If you installed SVGA applications, or if you did not install
one of the operating systems from the ServerGuide CD
package, get the SVGA and SCSI device driver diskettes that
come with your server, and install these device drivers now.
If your server came with a preinstalled PeerMaster or
ServeRAID adapter, install the device drivers from the
appropriate diskette.
These diskettes contain README files to help you install
device drivers and complete your installation. Be sure to
review the README files before you install the device drivers.
Ø Install option files and monitoring programs (ServeRAID)
Some options that you install might come with a diskette that
contains device drivers, configuration files, or test programs.
To install these files (after your operating system is installed),
follow the instructions that come with the diskettes.
Ø Install application programs
To install application programs, follow the instructions
supplied with each application program.
74 PC Server 520 User's Handbook for PCI/EISA
To Next Page
Loading...
