2. Click Identication to view the PDU+ and Web/SNMP card information.
Adding users
You can add users who can access and control the PDU+ on the Multi-User Conguration page.
About this task
To create a list of users who can access and control the PDU+, complete the following steps:
Procedure
1. From the main status page, in the left navigation pane, click System.
2. Click Multi-User to add users who can only view the PDU+ status or users who can change the PDU+
settings.
Changing the date and time
You can change the date and time of the PDU+ on the Date and Time page.
About this task
Important: Changing the PDU+ date and time affects other system settings such as e-mail, traps, and
logs.
To change the date and time, complete the following steps:
Procedure
1. From the main status page, in the left navigation pane, click System.
2. Click Date and Time to view and modify the system date and time.
You can set the date and time manually, synchronize it with the computer time, or synchronize it with
an NTP server.
Changing event alerts
You can change event alerts on the SNMP Trap Receivers page.
About this task
To congure the PDU+ to send e-mail or SNMP trap alerts to specied users when specic events occur,
complete the following steps:
Procedure
1. From the main status page, in the left navigation pane, click System.
2. Click Trap Receivers to create a list of users or workstations who will be alerted with an SNMP trap
message.
You can specify the IP addresses of up to eight trap receivers, the community information, type of trap,
severity of trap, and description of the events that cause the traps.
3. Click Email Notication under System to create a list of up to four users who will be alerted with an e-
mail.
Use this menu to specify the mail server, user account, DNS, and other information necessary to set up
a mail server for sending mail alerts. Use the Email Receivers Table to add the e-mail addresses.
Changing the network information
Use the Network menu to change the network information for the PDU+, for example, the IP address.
About this task
70
Power Systems: Racks and rack features
To Next Page
Loading...
Need help?
General
