Use the following tables to determine the appropriate power cord to use with your system in your
country.
Table 126 lists power cords to use from the server to the power mains. These power cords are not used
with IBM supplied PDUs.
Table 127 on page 101 lists power cords that connect IBM servers to a PDU.
Table 126. Supported power cords for POWER8 systems
1
Feature codes (FC) Description Voltage,
amperage, and
length
IBM shipped
plug
Matched female
wall receptacle
(on wall)
IBM part number
6460 Type 4 NEMA
5-15 plug
120 - 127 V ac, 12
A, 4.3 m (14 ft)
Plug type 4 Receptacle type 4 39M5513
6469 Type 5 NEMA
6-15 plug
200 - 240 V ac, 12
A (15 A derated),
4.3 m (14 ft)
Plug type 5 Receptacle type 5 39M5096
6470 Type 4 NEMA
5-15 plug
100 - 127 V ac, 12
A, 1.8 m (6 ft)
Plug type 4 Receptacle type 4 39M5080
6471 Type 70
INMETRO NBR
6147
100 - 127 V ac, 15
A, 2.7 m (9 ft)
Plug type 70 Receptacle type
70
39M5233
6472 Type 18 CEE (7)
VII
200 - 240 V ac, 10
A, 2.7 m (9 ft)
Plug type 18 Receptacle type
18
39M5123
96 Site and hardware planning
To Next Page
Loading...
Need help?
General