Hardware Management Console (HMC) Case Configuration Study for LPAR Management 7
To calculate your desired and maximum memory values accurately, we
recommend that you use the LVT tool. This tool is available at:
http://www.ibm.com/servers/eserver/iseries/lpar/systemdesign.htm
Figure 1 shows an example of how you can use the LPAR validation tool to verify
a memory configuration. In Figure 1, there are 4 partitions (P1..P4) defined on a
p595 system with a total amount of 32 GB of memory.
Figure 1 Using LVT to validate the LPAR configuration
To Next Page
Loading...
