IBM Power System S922 9009-22A User Manual

Power Systems
Installing the IBM Power System S922
(9009-22A and 9009-22G), IBM Power
System H922 (9223-22H), or IBM Power
System H922S (9223-22S)
IBM
GI11-9931-04

IBM Power System S922 9009-22A Specifications

General

Processor Sockets	2
Expansion Slots	8 PCIe Gen4 slots
Processor	POWER9
Memory	Up to 4 TB
Memory Slots	16 DIMM slots
Networking	Dual 10GbE standard
Storage	Up to 24 SFF (2.5") SAS/SATA bays or up to 12 NVMe drives

Summary

Safety notices

Installing a rack-based server

Prerequisite for installing the rack-mounted server

Understand prerequisites for server installation.

Completing inventory for your server

Determining and marking the location in the rack

Attaching the mounting hardware to the rack

Install the necessary hardware components to mount the server in the rack.

Installing the system into the rack

Securely place the server unit into the prepared rack mounts.

Cabling the server and setting up a console

Connect necessary cables and configure the server's console interface.

Cabling the server and connecting expansion units

Connect cables and expansion units to the server.

Setting up a preinstalled server

Prerequisite for installing the preinstalled server

Removing the shipping bracket and connecting power cords

Completing the server setup

Completing the server setup by using an HMC

Configure the server using a Hardware Management Console (HMC).

Completing the server setup without using an HMC