EasyManuals Logo
Home>IBM>Storage>DS8880 Series

IBM DS8880 Series User Manual

IBM DS8880 Series
244 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #233 background imageLoading...
Page #233 background image
DANGER:
-
-
Uninterruptible power supply (UPS) units contain specific hazardous materials.
Observe the following precautions if your product contains a UPS:
The UPS contains lethal voltages. All repairs and service must be performed only by an authorized
service support representative. There are no user serviceable parts inside the UPS.
• The UPS contains its own energy source (batteries). The output receptacles might carry live voltage
even when the UPS is not connected to an AC supply.
• Do not remove or unplug the input cord when the UPS is turned on. This removes the safety
ground from the UPS and the equipment connected to the UPS.
• The UPS is heavy because of the electronics and batteries that are required. To avoid injury,
observe the following precautions:
Do not attempt to lift the UPS by yourself. Ask another service representative for assistance.
Remove the battery, electronics assembly, or both from the UPS before removing the UPS from
the shipping carton or installing or removing the UPS in the rack. (D007)
DANGER: Professional movers are to be used for all relocation activities. Serious injury or death
may occur if systems are handled and moved incorrectly. (D008)
Labels
Labels
Use the reference numbers in parentheses at the end of each notice, such as (L001),
to find the matching translated notice in IBM Systems Safety Notices.
DANGER: Hazardous voltage, current, or energy levels are present inside any component that has
this label attached. Do not open any cover or barrier that contains this label. (L001)
DANGER: Multiple power cords. The product might be equipped with multiple power cords. To
remove all hazardous voltages, disconnect all power cords. (L003)
CAUTION: System or part is heavy. The label is accompanied by a specific weight range. (L009)
CAUTION: Pinch hazard. (L012)
ATTENTION: Refer to the Installation Planning Guide for additional explanation on configurations
supported for given voltage groups and Power Cord information. (L025)
ATTENTION: For use at altitude 2000 m or lower (L026)
Text based labels
Text Based Labels
and / or
Notices 221

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the IBM DS8880 Series and is the answer not in the manual?

IBM DS8880 Series Specifications

General IconGeneral
BrandIBM
ModelDS8880 Series
CategoryStorage
LanguageEnglish

Related product manuals