Chapter 2. Hardware features
Use this information to assist you with planning, ordering, and managing your
storage system.
The following table lists feature codes that are used to order hardware features for
your system.
Table 21. Feature codes for hardware features
Feature
code Feature Description
0101 Single-phase input power indicator,
200 - 220 V, 30 A
0102 Single-phase input power indicator,
220 - 240 V, 30 A
0170 Top expansion For models 985 and 85E, 986 and
86E, 988 and 88E, increases frame
from 40U to 46U
0200 Shipping weight reduction Maximum shipping weight of any
storage system base model or
expansion model does not exceed 909
kg (2000 lb) each. Packaging adds 120
kg (265 lb).
0400 BSMI certification documents Required when the storage system
model is shipped to Taiwan.
0403 Non-encryption certification key Required when the storage system
model is shipped to China or Russia.
1050 Battery service modules Single-phase DC-UPS
1052 Battery service modules Three-phase DC-UPS
1055 Extended power line disturbance An optional feature that is used to
protect the storage system from a
power-line disturbance for up to 40
seconds.
1062 Single-phase power cord, 200 - 240 V,
60 A, 3-pin connector
HBL360C6W, Pin and Sleeve
Connector, IEC 60309, 2P3W
HBL360R6W, AC Receptacle, IEC
60309, 2P3W
1063 Single-phase power cord, 200 - 240 V,
63 A, no connector
Inline Connector: not applicable
Receptacle: not applicable
1086 Three-phase high voltage (five-wire
3P+N+G), 380-415V (nominal), 30 A,
IEC 60309 5-pin customer connector
HBL530C6V02, Pin and Sleeve
Connector, IEC 60309, 4P5W
HBL530R6V02, AC Receptacle, IEC
60309, 4P5W
1087 Three-phase low voltage (four-wire
3P+G), 200-240V, 30 A, IEC 60309
4-pin customer connector
HBL430C9W, Pin and Sleeve
Connector, IEC 60309, 3P4W
HBL430R9W, AC Receptacle, IEC
60309, 3P4W
© Copyright IBM Corp. 2004, 2018 41
|||
|
To Next Page
Need help?
General