Configuration rules for power features
Ensure that you are familiar with the configuration rules and feature codes before
you order power features.
When you order power cord features, the following rules apply.
v You must order a minimum of one power cord feature for each frame. Each
feature code represents a pair of power cords (two cords).
v You must select the power cord that is appropriate to the input voltage and
geographic region where the storage system is located.
If the optional extended power line disturbance (ePLD) option is needed, you must
order feature code 1055 for each base frame and expansion frame. The ePLD
option protects the storage system from a power-line disturbance for 40 seconds.
Other configuration features
Features are available for shipping and setting up the storage system.
You can select shipping and setup options for the storage system. The following
list identifies optional feature codes that you can specify to customize or to receive
your storage system.
v Extended power line disturbance (ePLD) option
v BSMI certificate (Taiwan)
v Shipping weight reduction option
Extended power line disturbance
The extended power line disturbance (ePLD) option (feature code 1055) gives the
storage system the ability to tolerate power line disturbance for 40 seconds, rather
than 4 seconds without the ePLD feature. This feature is optional for your storage
system configuration.
Feature code for extended power-line disturbance
Use this feature code to order the extended power-line disturbance (ePLD) feature
for your storage system.
Table 64. Feature code for the ePLD
Feature code Description Models
1055 Extended power line disturbance All
BSMI certificate (Taiwan)
The BSMI certificate for Taiwan option provides the required Bureau of Standards,
Metrology, and Inspection (BSMI) ISO 9001 certification documents for storage
system shipments to Taiwan.
If the storage system that you order is shipped to Taiwan, you must order this
option for each model that is shipped.
Feature code for BSMI certification documents (Taiwan)
Use this feature code to you order the Bureau of Standards, Metrology, and
Inspection (BSMI) certification documents that are required when the storage
system is shipped to Taiwan.
Chapter 4. Storage system physical configuration 113
To Next Page
Need help?
General