Table 126. Supported power cords for POWER8 systems
1
(continued)
Feature codes (FC) Description Voltage,
amperage, and
length
IBM shipped
plug
Matched female
wall receptacle
(on wall)
IBM part number
6672 Type 26 200 -240 V ac, 10
A, 1.5 m (5 ft)
Plug type 26 Receptacle type
26
39M5375
6680 Type 6 AS/NZS
3112:2000
250 V ac, 10 A,
2.7 m (9 ft)
Plug type 6 Receptacle type 6 39M5102
EPAD
2
Type Rong Feng
RF-203P
192 - 400 V dc, 10
A, 2.5 m (8 ft)
HVDC plug HVDC receptacle 00RR617
EB3H DC power cable
3,
4
-48 V dc, 25 A, 3
m (10 ft)
Multi-Beam XLX
3 position
connector
Two-hole,
standard barrel
lug
5
00RR437
Notes:
1. The part numbers that are mentioned in this table meet the European Union Directive 2002/95/EC on the
Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment.
2. FC EPAC can be used to allow IBM Manufacturing to select a length of cord (1.0 m (3.3 ft), 1.5 m (4.9 ft), or 2.5
m (8 ft)) during rack integration.
3. FC EB3H includes a 750 watt power supply and circuit breaker for FC EPB8 (power distribution panel).
4. Wire size is 10 AWG (American Wire Gauge).
5. FC EB3H attaches to FC EPB8.
100 Site and hardware planning
To Next Page
Loading...
Need help?
General