IBM Enterprise Console - Page 103

STATUS mandatory
DESCRIPTION
"A number designating a monitored condition."
:= { lanalert-data 3 }
thresholdID OBJECT-TYPE
SYNTAX INTEGER (1..4294967295)
ACCESS not-accessible
STATUS optional
DESCRIPTION
"A number designating a threshold set on a
monitored condition."
:= { lanalert-data 4 }
alertText OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..79))
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A string describing an alert condition."
:= { lanalert-data 5 }
managementServerName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..15))
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The name of a LANAlert management server."
:= { lanalert-data 6 }
nodeAddressIPX OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (12))
ACCESS not-accessible
STATUS optional
DESCRIPTION
"The IPX network address of a node."
:= { lanalert-data 7 }
nodeAddressAppleTalk OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (4))
ACCESS not-accessible
STATUS optional
DESCRIPTION
"The AppleTalk network address of a node."
:= { lanalert-data 8 }
nodeAddressIP OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (4))
ACCESS not-accessible
STATUS optional
DESCRIPTION
"The IP network address of a node."
:= { lanalert-data 9 }
alertType OBJECT-TYPE
SYNTAX INTEGER {
thresholdAlert(1),
changeAlert(2),
resettableAlert(3)
}
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The type of LANAlert alert packet.
Threshold alerts are generated when a condition crosses a preconfigured threshold,
and are cleared by the agent when the condition crosses the preconfigured reset
value.
Chapter 7. SNMP Adapter 91