IBM Enterprise Console - Strtecadp

STRTECADP
Starts an AS/400 adapter.
SYNOPSIS
STRTECADP EVTADP(name) CFGFILE(filename)
DESCRIPTION
The AS/400 adapter runs as a batch job. The STRTECADP command starts an
AS/400 adapter.
Authorization
QSYSOPR
*USE
PUBLIC
*EXCLUDE
Note: To grant other users authority to this command, use the following
commands on the AS/400 system:
GRTOBJAUT OBJ(QSYS/STRTECADP) OBJTYPE(*CMD) USER(user) AUT(*USE)
GRTOBJAUT OBJ(QTMETECA/SBMEVTADAP) OBJTYPE(*PGM) USER(user) AUT(*USE)
GRTOBJAUT OBJ(QTMETECA02/STARTALERT) OBJTYPE(*PGM) USER(user) AUT(*USE)
GRTOBJAUT OBJ(QSYS/QNMRRGF) OBJECTYPE(*PGM) USER(user) AUT(*USE)
GRTOBJAUT OBJ(QSYS/QNMRGFN) OBJECTYPE(*PGM) USER(user) AUT(*USE)
GRTOBJAUT OBJ(QSYS/QNMDRGFN) OBJECTYPE(*PGM) USER(user) AUT(*USE)
Arguments
EVTADP(name)
Specifies a name for the adapter being started. This name is used on the
ENDTECADP AS/400 command. It can be any valid AS/400 job name;
however, each adapter running on the AS/400 system must have a unique
name.
CFGFILE(filename)
Specifies the full path name of the configuration file, in IFS format, to be
used.
EXAMPLES
The following command starts an AS/400 alert adapter using the default
configuration file.
STRTECADP EVTADP(ALERTADP)
CFGFILE(’/QSYS.LIB/QUSRSYS.LIB/CFG_ALERT.FILE/ALRCFG.MBR’)
The following command starts the AS/400 alert adapter with the
/QSYS.LIB/MYLIB.LIB/MYFILE.FILE/MYCFG.MBR configuration file.
STRTECADP EVTADP(MYADP)
CFGFILE(’/QSYS.LIB/MYLIB.LIB/MYFILE.FILE/MYCFG.MBR’)
28 IBM Tivoli Enterprise Console: Adapters Guide