Introduction 9
Features and specifications
1
The IBM Flex System FC5022 2-Port 16Gb FC Adapter conforms to environmental and power
specifications for the supported compute nodes and IBM Flex System chassis in which they are installed.
Refer to the documentation provided for these products for more information.
Operating humidity 20% to 80%
Nonoperating
Humidity
8% to 80%
Power dissipation 8.5 W maximum
8 W nominal
Operating voltage Per PCIe 2.0 specifications
Dimensions 4.19 in. (106.5 mm) depth
3.34 in. (84.9 mm) width
1.64 in. (41.5 mm) height
Weight .31 pounds (140 grams)
Topology Switched
Point-to-Point (N_Port)
Data protection Cyclic redundancy check (CRC) on PCIE and line-side links
ECC within the ASIC memory blocks (2-bit detection and 1-bit correction)
Error correction code (ECC) and parity through the ASIC
Supported Fibre
Channel features and
protocols
• SCSI over FC (FCP)
• FCP2
• FCP3
• FC-SP Authentication
• NPIV
• Quality of Service (QoS)
• Target rate limiting
• Boot over SAN
• Fabric-Based Boot LUN Discovery
• I/O Interrupt Coalescing
• T10 Data CRC
• Multiple Priority (VC_RDY)
• Frame-Level Load Balancing
• Persistent Binding
• Fabric-Based Configuration
• vHBA
Other features
• ASIC Flip-flops Parity Protected
• T10 Data CRC
• ECC Memory Parity Protected
TABLE 1 Adapter specifications (Continued)
Feature Description
To Next Page
Loading...
