IBM Flex System FC5022 - Using the BIOS Configuration Utility

©Copyright IBM Corp. 2012 29
Appendix
A
Using the BIOS Configuration Utility
To configure BIOS parameters using the Brocade BIOS Configuration Utility, use the following steps.
1. When you are prompted to enter the Brocade BIOS configuration menu during the IBM Flex
System FC5022 2-Port 16Gb FC Adapter initialization, press Alt+B or Ctrl+B.
The Brocade BIOS Configuration Menu displays a list of installed adapter ports, similar to the
following.
Under the Ad No column, 1/0 and 1/1 are the first port and second port respectively on the first
installed adapter. Note that 2/0 and 2/1 are the first and second port on the second installed adapter
if installed.
Select Page Up to go to a previous screen or Page Down to go to the next screen.
2. Select a port that you want to configure.
A screen similar to the following displays. In the following example, port 0 was selected.