30 IBM Flex System FC5022 2-Port 16Gb FC Adapter User’s Guide
Using the BIOS Configuration Utility
A
3. Select one of the following:
• Adapter Settings. Use the Adapter Settings screen to enable BIOS, port speed, and auto-
discovery of boot LUN information on the fabric. You can determine adapter WWWN and
PWWN. Proceed to step 4.
• Boot Device Settings. Use the Device Settings screen to select the boot target and LUN for
booting the host system. Proceed to step 6.
4. Select Adapter Settings and press Enter to begin adapter configuration.
A screen similar to the following displays showing the port’s current BIOS version, NWWN, and
PWWN. Table 3 on page 31 explains options available for BIOS, port speed, and boot LUN
settings.
To Next Page
Loading...
