Using the BIOS Configuration Utility 33
Using the BIOS Configuration Utility
A
9. Select the LUN on the target device that you want to designate as the boot LUN for the host. This
must be the same LUN that you bind to the adapter port using the storage system’s management or
configuration utility.
You only need to select the bootable LUN once. After the first boot, the same LUN will be used
until changed through the BIOS Configuration Utility.
10. Press Enter. The selected device will be added to the list of boot devices for the adapter. (In the
following example, the boot LUN with ID2 was selected from the screen shown in step 8.)
To Next Page
Loading...
