Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
9001 I/O processor card detected device configuration error
Perform SDIOP-PIP33.
SVCDOCS
9002 I/O processor card detected device error
Perform SDIOP-PIP16.
FI01105
STORIOA
FI01140
BACKPLN
FI01106
9008 I/O card does not support functions expected by devices
Perform SDIOP-PIP25.
SVCDOCS
9009 Call your next level of support for assistance SVCDOCS
9010 Cache data associated with attached devices cannot be found
Perform SDIOP-PIP31.
SVCDOCS
9011 Cache data belongs to devices other than those attached
Perform SDIOP-PIP32.
SVCDOCS
9014 Mode jumper overridden due to cache data in conflicting mode
See JOVERRIDE.
SVCDOCS
9015 Mode jumper missing
See JMISSING.
SVCDOCS
9020 to 9021 Array not functional due to present hardware configuration.
Perform SDIOP-PIP20.
SVCDOCS
9022 to 9024 Array not functional due to present hardware configuration.
Perform SDIOP-PIP22.
SVCDOCS
9025 Disk unit is not supported at its physical location.
Perform SDIOP-PIP21.
SVCDOCS
9026 Array not functional due to present hardware configuration.
Perform SDIOP-PIP22.
SVCDOCS
9027 Array not functional due to present hardware configuration.
Perform SDIOP-PIP34.
SVCDOCS
9028 Incorrect hardware configuration change has been detected.
Reduce the number of arrays on IOP. Either move all devices in an array to
another IOP that supports arrays, or stop an array on this IOP.
SVCDOCS
9029 Incorrect hardware configuration change has been detected.
Contact your next level of support.
SVCDOCS
902F Array addendum Product Activity Log entry
This entry contains additional array information for 90xx reference codes
when the array contains more than 10 array members. Use the 90xx entry
that occurred at the same time as this reference code as the starting point
for this problem.
2748, 2757, 2763, 2778, 2782, 5703
System Reference Codes 143
To Next Page
Loading...
Need help?
General