IBM iSeries 800 Analyze Hardware Problems (System Reference Codes

Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
0201 WS IOP detected error when transmitting data
Perform WSAC-PIP1.
FI00604
GXC7777
FI00631
FI00730
0203 WS IOP detected parity error from device
Perform WSAC-PIP1.
FI00604
GXC7777
FI00631
FI00730
0204 Device detected parity error from WS IOP
Perform WSAC-PIP1.
FI00604
GXC7777
FI00631
FI00730
0205 WS IOP detected error when transmitting data
Perform WSAC-PIP1.
FI00604
GXC7777
FI00631
FI00730
0206 WS IOP detected wrong data from device
Perform WSAC-PIP1.
FI00604
FI00631
FI00730
0207 WS IOP detected wrong address from device
Perform WSAC-PIP1.
FI00604
GXC7777
FI00730
0208 WS IOP detected device power turned off, and then on GXCEEEE
FI00604
0209 WS IOP detected wrong device response to start command FI00604
FI00730
0211 Printer detected equipment error FI00604
FI00730
0221 Device detected not valid value from WS IOP FI00604
FI00730
0224 Device detected wrong start command from WS IOP FI00604
FI00730
0225 WS IOP detected wrong exception response from device FI00604
FI00730
0290 WS IOP detected no status change from device FI00604
FI00730
0291 WS IOP detected busy time-out from device FI00604
FI00730
5000 Wrong command sent by Licensed Internal Code AJDG301
5001 Procedure error in Licensed Internal Code AJDG301
5002 Procedure error in Licensed Internal Code
Procedure error in machine instructions
CXCTEMP
AJDG301
5006 Procedure error in Licensed Internal Code AJDG301
5007 Procedure error in Licensed Internal Code AJDG301
CXCMSTA
5009 Incorrect command value sent by Licensed Internal Code AJDG301
500A Procedure error in Licensed Internal Code AJDG301
B075
222
iSeries: iSeries 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Analyze Hardware Problems (System Reference
Codes)

IBM iSeries 800 Specifications

General

Brand	IBM
Model	iSeries 800
Category	Server
Language	English