IBM iSeries 800 Analyze Hardware Problems (System Reference Codes

Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
6905 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. There is no valid kernel to load for the specified IPL Mode of
the guest partition. Either the kernel is not valid or there is not a kernel in
the selected IPL Mode. Verify that the kernel specified to load is valid and
the IPL mode specified is where the kernel is located. If the problem
persists then record all words of the SRC and contact your next level of
support.
LPARCFG
6910 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. A storage management problem occurred loading the guest
partition. Record all the words of the SRC and contact your next level of
support.
LPARCFG
6920 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. A problem occurred while loading the guest partition. Record
all the words of the SRC and contact your next level of support.
LPARSUP
6930 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. A problem occurred while loading the guest partition. Record
all of the words in the SRC and contact your next level of support.
LPARCFG
7111 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. Load-source device driver does not point to an IOP hardware
driver.
Read and understand the information about logical partitions. See the
iSeries Service Functions information.
Initiate a Primary partition main storage dump, and contact your next level
of support.
FI00099
7115 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. The IOP identified in word 5 is not reporting to the secondary
partition. Removing an IOP hardware driver (not the load source for the
current IPL) from the Primary partition failed. The IPL will continue, but
the secondary partition will not be able to establish connections to this IOP.
Word 3: Bus, Word 4: Board, Word 5: Card.
FI00099
LPARSUP
7117 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. The IOP identified in word 5 is not reporting to the secondary
partition. Removing the IOP hardware driver that is associated with the
current load-source has failed. The IPL will fail.
Read and understand the information about logical partitions. See the
iSeries Service Functions information.
Record the SRC. The location of the IOP is in SRC words 3, 4 and 5. Word
3: Bus, Word 4: Board, Word 5: Card.
FI00099
LPARSUP
B2xx
System Reference Codes 231

IBM iSeries 800 Specifications

General

Brand	IBM
Model	iSeries 800
Category	Server
Language	English