IBM iSeries 800 Analyze Hardware Problems (System Reference Codes

Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
4730 Processor On Demand error detected.
Processor On Demand standby processors are in use.
Contact your service provider.
AJDG301
4731 Processor On Demand error detected.
The Processor On Demand Trial Activation period is not valid.
Contact your next level of support.
AJDG301
4733 Processor On Demand error detected.
Contact your service provider.
AJDG301
4740 Processor On Demand error detected.
The Processor On Demand Activation code just entered is not valid.
Contact your next level of support.
AJDG301
4741 Processor On Demand error detected.
A nonvalid Processor On Demand Activation code has been entered more
than 5 consecutive times.
Contact your service provider.
AJDG301
4745 Processor Capacity card replaced on activated POD system.
Contact IBM Support to order a replacement Processor On Demand
activation code.
4747 1 hour left in POD 14 day Trial Activation Period.
If a new activation code was purchased, it should be entered now.
Otherwise, the system will revert back to its previous activation state at the
end of the Trial Activation Period.
5001 DST received no response from a work station controller
The workstation I/O processor for the system or partition console did not
respond.
If the system uses an iSeries Operations Console, perform OPCON-PIP1.
Otherwise, perform BUS-PIPCNSL01.
FI00380
AJDG301
5002 DST problem attempting to use the system console
A code problem occurred during an attempt to use the system console.
Perform LIC-PIP3.
AJDG301
FI00380
5003 Service program failed
The ASCII system console failed to respond.
FI00320
FI00602
UG3USR1
AJDG301
FI00380
5004 DST console failed to respond
The system console failed to respond.
If the system uses an iSeries Operations Console, perform OPCON-PIP1.
Otherwise, perform TWSC-PIP1.
FI00320
FI00602
UG3USR1
AJDG301
FI00380
B6xx (including A6xx)
270
iSeries: iSeries 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Analyze Hardware Problems (System Reference
Codes)

IBM iSeries 800 Specifications

General

Brand	IBM
Model	iSeries 800
Category	Server
Language	English