IBM iSeries 800 - Page 283

To Next Page

To Previous Page

Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item

6961 Multi-adapter bridge card slot error, do not use card slot

LED control failure, do not use slot.

The card location is not available for use. The Failing Item with the card

slot error is in the Failing Item list for this reference code.

See the SLOTERR symbolic FRU for the list of messages and a further

description of the problem detected by Licensed Internal Code.

For this reference code the failing item list presented in the ″Service Action

Log″ can be different from the failing item list documented here. That is

due to the differences in system models and features installed.

If the ″Service Action Log″ is available then use the failing item list

presented there for servicing this reference code.

If the ″Service Action Log″ is not available then use the failing item list

documented here. By following the procedures in the symbolic FRUs listed

here you will isolate to the correct FRU list based on system model and

features installed.

SLOTERR

MASBUS

6962 Multi-adapter bridge card slot error, do not use card slot

Power control failure, do not use slot.

If there is a Linux partition in the system, any IOPs plugged into slots

owned by a Linux partition will not power on. This error will be logged.

Correct the situation by removing the IOP cards.