IBM iSeries 800 Hardware Problem Analysis And Isolation

Failing item code Description/Action
FI00708 FI00708 indicates that the local communications cable (X.21 interface) is the failing item.
Check the communications cable for the part number.
FI00709 FI00709 indicates that the local communications cable (V.35 interface) is the failing item.
Check the communications cable for the part number.
FI00710 FI00710 indicates that the local communications cable (V.24 interface with remote power on)
is the failing item.
The remote power on feature is given support by using an available pin on the EIA-232/V.24
enhanced or EIA-232/V.24 non-enhanced cables. Check the communications cable for the
part number.
FI00711 FI00711 indicates that the local communications cable (token-ring interface cable) is the
failing item.
Note: An IBM
(R)
Cabling System Patch Cable or a comparable cable may have been
supplied by the user to increase the length of this cable. Any cable attached to the
token-ring interface cable may also be the failing item.
FI00712 FI00712 indicates that the token-ring access unit is the failing item.
FI00716 FI00716 indicates that the EIA-232/V.24 enhanced cable is the failing item.
Check the communications cable for the part number.
FI00717 FI00717 indicates that the EIA-232/V.24 non-enhanced cable is the failing item.
Check the communications cable for the part number.
FI00718 FI00718 indicates that an IOP card is the failing item.
Use the IOP type to determine the part.
FI00719 FI00719 indicates that an IOA card is the failing item.
FI00720 FI00720 indicates that the Ethernet transceiver is the failing item.
Verify that the signal quality error switch in the transceiver that the Ethernet is attached to is
set to active.
See the transceiver operator’s guide for correct operation or correct remove and replace
procedure.
FI00721 FI00721 indicates that the token-ring IOA card is the failing item.
Use the IOA type to determine the part.
FI00722 FI00722 indicates that the cable attached to the local area network IOA is the failing item.
FI00723 FI00723 indicates that the communications two-port adapter cable for the communications
IOA card is the failing item.
Exchange the communications two-port adapter cable.
If this does not correct the problem, use the IOA type to determine the part.
FI00725 FI00725 indicates that the Ethernet IOA card is the failing item.
Use the IOA type to determine the part.
FI00726 FI00726 indicates that a communications IOA card is the failing item:
Use the IOA type to determine the part.
Analyze hardware problems 259

IBM iSeries 800 Specifications

General

Brand	IBM
Model	iSeries 800
Category	Server
Language	English