Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
0410 Removal of Disk Unit K9 is complete
0411 Removal of Disk Unit K10 is complete
0412 Removal of Disk Unit K11 is complete
0413 Removal of Disk Unit K12 is complete
0414 Removal of Disk Unit K13 is complete
0415 Removal of Disk Unit K14 is complete
0416 Removal of device 1 is complete
0417 Removal of device 2 is complete
0418 Removal of Disk Unit 9 is complete
0419 Removal of Disk Unit 10 is complete
041A Removal of Disk Unit 11 is complete
041B Removal of Disk Unit 12 is complete
041C Removal of device 3 is complete
041D Removal of Disk Unit K15 is complete
041E Removal of Disk Unit K16 is complete
041F Removal of device 4 is complete
0500 Timeout, no action detected. Reinitialize the operation
No action was detected for the installation or removal of disk unit 1, and
the bus was released.
You must reinitialize the operation to continue.
0501 Timeout, no action detected. Reinitialize the operation
No action was detected for the installation or removal of disk unit 2, and
the bus was released.
You must reinitialize the operation to continue.
0502 Timeout, no action detected. Reinitialize the operation
No action was detected for the installation or removal of disk unit 3, and
the bus was released.
You must reinitialize the operation to continue.
0503 Timeout, no action detected. Reinitialize the operation.
No action was detected for the installation or removal of disk unit 4, and
the bus was released.
You must reinitialize the operation to continue.
0504 Timeout, no action detected. Reinitialize the operation.
No action was detected for the installation or removal of disk unit 5, and
the bus was released.
You must reinitialize the operation to continue.
1xxx
20
iSeries: iSeries 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Analyze Hardware Problems (System Reference Codes)
To Next Page
Loading...
Need help?
General