IBM iSeries 820 Analyze Hardware Problems (System Reference Codes

Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
2153 Power Supply P03 Fault
A fault has been detected for Power Supply P03.
PWRSPLY
SPNLCRD
2154 Power Supply P04 Fault
A fault has been detected for Power Supply P04.
PWRSPLY
SPNLCRD
2201 Power Supply P01 or P02 Overcurrent Fault
A POW-PIP is required for identifying which load is at fault.
PWROC
SPNLCRD
CBLALL
2202 Power Supply P03 or P04 Overcurrent Fault
A POW-PIP is required for identifying which load is at fault.
PWROC
SPNLCRD
CBLALL
2210 One of the CPM regulators has reported a fault PWRSPLY
SPNLCRD
2211 CPM Regulator 1 Fault PWRSPLY
SPNLCRD
2212 CPM Regulator 2 Fault PWRSPLY
SPNLCRD
2213 CPM Regulator 3 Fault PWRSPLY
SPNLCRD
2221 Power Good Fault
A MFIOP power good fault occurred.
SPNLCRD
PGDPART
CBLALL
2222 Power Good Type M Fault
A Memory power good fault occurred.
SPNLCRD
PGDPART
CBLALL
2223 Power Good Type P Fault
A Processor power good fault occurred.
SPNLCRD
PGDPART
CBLALL
2224 Power Good Type I Fault
A Internal expansion power good fault occurred.
SPNLCRD
PGDPART
CBLALL
2231 System Unit Interlock Failure INTRLCK
SPNLCRD
CBLALL
2232 Secondary Frame Interlock Failure INTRLCK
SPNLCRD
CBLALL
2240 Air Moving Device Panel Fault AIRMOVR
PWRSPLY
2241 Air Moving Device 1 Fault
A problem was detected with an Air Moving Device which can be caused
by an Air Moving Device not being installed or operating at the wrong
speed.
AIRMOVR
SPNLCRD
2242 Air Moving Device 2 Fault
A problem was detected with an Air Moving Device which can be caused
by an Air Moving Device not being installed or operating at the wrong
speed.
AIRMOVR
SPNLCRD
1xxx
30
iSeries: iSeries 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Analyze Hardware Problems (System Reference Codes)

IBM iSeries 820 Specifications

General

Brand	IBM
Model	iSeries 820
Category	Server
Language	English