IBM Nortel Networks L2/3 - Page 112

98 Nortel Networks L2/3 Ethernet Switch Module for IBM Eserver BladeCenter
name "VLAN_Green"
def INT2 INT3 EXT1 EXT2 EXT5 EXT6
/* def INT2 EXT1 EXT2 EXT5 EXT6 on GbESM_2
/c/l2/vlan 20
ena
name "VLAN_Red"
def INT1 INT2 EXT1 EXT2 EXT5 EXT6
/* def INT1 INT2 INT3 EXT1 EXT2 EXT5 EXT6 on GbESM_2
/c/l2/vlan 99
ena
name "MGMT"
def INT4 EXT1 EXT2 EXT5 EXT6
/c/l2/stg 1/off
/c/l2/stg 1/clear
/c/l2/stg 1/add 1 5 10 20 99
/c/l2/lacp/port EXT1
mode active
/c/l2/lacp/port EXT2
mode active
adminkey 17
/c/l2/lacp/port EXT5
mode active
/c/l2/lacp/port EXT6
mode active
adminkey 21
/c/l3/if 99
ena
addr 10.99.0.243
/* addr 10.99.0.244 on GbESM_2
mask 255.255.255.0
broad 10.99.0.255
vlan 99
/c/l3/gw 1
ena
addr 10.99.0.245
/c/l3/gw 2
ena
addr 10.99.0.246
/c/l3/frwd/off
dirbr disabled
/
script end /**** DO NOT EDIT THIS LINE!
Example 7-16 Advanced Layer 2 Topology with Rapid-PVST configuration for the Cisco3560 Switches
!
version 12.2
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Core1
! hostname Core2 on Core2
!
enable password cisco
!
no aaa new-model